| Probable Cause | Solution |
|
Toner Not Distributed Evenly
|
Open the toner reservoir on the developer and carefully redistribute toner.
|
|
Low Toner
|
If "Toner Low"is displayed, refill developer with toner.
|
|
Print Density Dial Too Low
|
Set print density dial at higher setting.
|
|
Dirty Transfer Corona Wire
|
Clean corona wires.
|
|
Paper Quality
|
Choose a different type or source of paper.
|
|
Damaged, Dirty, Worn Out, or Contaminated Developer, Drum, or Fuser
|
See "Transfer Sequence Fault Isolation Test"(Page 7-39) to determine where the fading first occurs. Replace consumable or call for service.
|
|
Broken Developer Drive Gear
|
Check drive gear (Page 7-51).
|
