LaserMatrix Series Troubleshooting Guide
- Problem:
- Repl. Fuser Pad
| Probable Cause | Solution |
|
Fuser's Felt Cleaning Pad Has Exceeded 3666 Ft
|
Check the fuser's felt cleaning pad for caked on toner. Replace if necessary. After checking and/or replacing the cleaning pad, reset the "Fuser Pad= ..."count in the Extended Configuration Menu. See Section 5.
|
Normally, replace the felt cleaning pad only when you refill the developer with toner. If you continually print on nonporous media, such as labels, you should replace the felt cleaning pad more often. In any case, it's always wise to check the fuser cleaning pad when "Repl. Fuser Pad"appears. "Auto Cont= On*"in the Configuration Menu allows printing to automatically continue with this maintenance message displayed. If "Auto Cont= Off*", you must press ON LINE to continue. Pressing ON LINE automatically resets the counter.
|
