LaserMatrix Series Troubleshooting Guide
- Problem:
- Repl. Developer
| Probable Cause | Solution |
|
Developer Unit Has Exceeded 91,666 Ft
|
Replace developer unit (and ozone filter) as soon as possible. If printing doesn't continue automatically, press ON LINE. After replacing the developer and ozone filter, reset the "Devlp. Ft= ..."count in the Extended Configuration Menu. See Section 5
|
"Auto Cont= On*" in the Configuration Menu allows printing to automatically continue with this maintenance message displayed. If "Auto Cont= Off*", you must press ON LINE to continue. Pressing ON LINE automatically resets the counter.
|
